Forums
NCKrawlers :: Forums :: NCK Tech Forums :: General Tech
 
<< Previous thread | Next thread >>
DOM Tube group order $3.50 per foot
Moderators: Administrator, NC-Fordguy, KrawlinYJ
Author Post
gogogadgetbiker
Thu Aug 05 2010, 05:33PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
I am going to be making a bulk order of 1.75" .120 wall DOM round tube soon.

All who pay me before the order is placed get it at cost $3.50 per foot.
I MUST have at least 20 sticks to get this price.
Most sticks will be 22-24 foot in length.

All who make me front the money will pay $3.75 per foot no exceptions.
"Obviously I don't want to front anything"

This is also a good time to order other steel materials "pricing will be good" so let me know what you want.

Will be delivered to my house in Greenville.

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
CDTXJ97
Thu Aug 05 2010, 07:33PM
NCK Member
Registered Member #278
Joined: Wed Mar 10 2010, 10:09PM
Location: Farmville
Posts: 261
ill get a stick let me know when you are goingto order i may get some other steel to.

97 XJ in pieces..
Back to top
SAYWHENCJ7
Thu Aug 05 2010, 08:22PM
NCK Member

Registered Member #97
Joined: Sun Aug 19 2007, 04:21PM
Location: GREENVILLE
Posts: 112
sounds good Bill I want to get 5 sticks of the 24ft I guess. Sorry for not getting by there tonight to get the Rockwells I got off late. Im leaving tomorrow to go to the beach to go fishing I will give you a check and pick up the Rockwells on sunday if thats ok.....

[ Edited Thu Aug 05 2010, 08:23PM ]
Back to top
gogogadgetbiker
Thu Aug 05 2010, 09:28PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
SAYWHENCJ7 wrote ...

sounds good Bill I want to get 5 sticks of the 24ft I guess. Sorry for not getting by there tonight to get the Rockwells I got off late. Im leaving tomorrow to go to the beach to go fishing I will give you a check and pick up the Rockwells on sunday if thats ok.....


No problem bud

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
gogogadgetbiker
Thu Aug 05 2010, 09:30PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
CDTXJ97 wrote ...

ill get a stick let me know when you are goingto order i may get some other steel to.


The sooner all the money is in my hand the better, that is really the biggest factor on when I may order. I would like to have the order in by August 23rd. Lead time is 5-7 days to get the materials after the order is placed.

[ Edited Thu Aug 05 2010, 09:31PM ]

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
n3pht
Thu Aug 05 2010, 10:09PM
NCK Officer

Registered Member #8
Joined: Thu Mar 08 2007, 10:59PM
Location: G-vagas
Posts: 373
I had a few sticks at one time

87 Suzuki Samrai
STOCK


PAVED ROADS ANOTHER WASTE OF GOVERNMENT SPENDING
Back to top
gogogadgetbiker
Fri Aug 06 2010, 07:49AM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
I think you had 2, and since that was about 3-4 years ago I have no idea what happened to them.

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
n3pht
Sat Aug 07 2010, 12:44AM
NCK Officer

Registered Member #8
Joined: Thu Mar 08 2007, 10:59PM
Location: G-vagas
Posts: 373
?

87 Suzuki Samrai
STOCK


PAVED ROADS ANOTHER WASTE OF GOVERNMENT SPENDING
Back to top
bygkuntrey13
Sat Aug 07 2010, 09:02AM
Registered Member #271
Joined: Thu Jan 21 2010, 12:46PM
Posts: 3
.

[ Edited Sat Aug 07 2010, 09:39AM ]
Back to top
gogogadgetbiker
Tue Aug 17 2010, 07:38PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
So far I have the following on my list.

WG-60'
Ed- 60'
Ryan- 144'
Jamie- 144'
Someone else- 20'
Me- 144'

There was someone else at the meeting but I can't remember his name.

That is 29 sticks of 20' approx which is plenty for me to make the order. If you want in speak up now, it will be ordered in the next 48 hours.


[ Edited Tue Aug 17 2010, 07:40PM ]

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
NC-Fordguy
Wed Aug 18 2010, 01:30PM
Webmaster

Registered Member #2
Joined: Tue Mar 06 2007, 05:53PM
Location: Bethel NC
Posts: 1151
Jamie having a bunch of steel tube is not a good idea for so many reasons

No Hablos Jeep

If it doesn't make sense, do it
Back to top
gogogadgetbiker
Tue Sep 07 2010, 04:46PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
Tube will be here tomorrow. Everyone who needs to pick some up give me a call tomorrow.

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
 

Jump:     Back to top

Syndicate this thread: rss 0.92 Syndicate this thread: rss 2.0 Syndicate this thread: RDF
Powered by e107 Forum System