Forums
NCKrawlers :: Forums :: We Done Did It :: Past Trail Reports
 
<< Previous thread | Next thread >>
July 4th weekend
Go to page   <<      
Moderators: Administrator, NC-Fordguy, KrawlinYJ
Author Post
mud4me
Mon Jun 09 2008, 07:33PM

Registered Member #143
Joined: Thu Dec 06 2007, 10:04PM
Location: Raleigh, NC
Posts: 375
NC-Fordguy wrote ...

Looks like I am out as I'm having to go another direction than planned.

Not enough time and $$$

I take it that the Detroit is toast?

Two Jeeps one Samurai
No $$$
Back to top
SAYWHENCJ7
Mon Jun 09 2008, 09:36PM
NCK Member

Registered Member #97
Joined: Sun Aug 19 2007, 04:21PM
Location: GREENVILLE
Posts: 112
how about another UNF run its close and gas is crazy and maybe we can get more people to come along if its that close....
Back to top
toyzilla
Tue Jun 10 2008, 10:45AM
Moderater

Registered Member #12
Joined: Mon Mar 12 2007, 10:39AM
Location: Tarboro, NC
Posts: 477
so does anyone want to do anything july 4th weekend. i haven't been able to get out yet this year and would like to go somewere.

"take it to the eXtreme"

93 Toyota Custom Built Tube Buggy Rock Crawler
4-link F&R, 36" TSL tires, 12k winch, Fox Shox, lock & loaded, dual cases, beadlocks , New Dirty 30 Front Axles
Check Out My Rig and Trail Rides. My photo's
scimpressions.com
Back to top
gogogadgetbiker
Tue Jun 10 2008, 12:32PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
I would like to go with my son if I can find a rig to borrow.

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
SAYWHENCJ7
Tue Jun 10 2008, 12:39PM
NCK Member

Registered Member #97
Joined: Sun Aug 19 2007, 04:21PM
Location: GREENVILLE
Posts: 112
UNF july 4th weekend??????
Back to top
mud4me
Tue Jun 10 2008, 01:48PM

Registered Member #143
Joined: Thu Dec 06 2007, 10:04PM
Location: Raleigh, NC
Posts: 375
If it's to be URE for the fourth, I'm out. Anywhere else, within a reasonable drive, I'm in. Just want to do something different.

Two Jeeps one Samurai
No $$$
Back to top
toyzilla
Tue Jun 10 2008, 03:10PM
Moderater

Registered Member #12
Joined: Mon Mar 12 2007, 10:39AM
Location: Tarboro, NC
Posts: 477
I like to go to Harlin KY. Leave thurs afternoon, A nice 3-4 day weekend. I when last year and took about 8 hours from were i'm at in ahoskie,nc.




"take it to the eXtreme"

93 Toyota Custom Built Tube Buggy Rock Crawler
4-link F&R, 36" TSL tires, 12k winch, Fox Shox, lock & loaded, dual cases, beadlocks , New Dirty 30 Front Axles
Check Out My Rig and Trail Rides. My photo's
scimpressions.com
Back to top
SAYWHENCJ7
Tue Jun 10 2008, 04:07PM
NCK Member

Registered Member #97
Joined: Sun Aug 19 2007, 04:21PM
Location: GREENVILLE
Posts: 112
So it sounds like Harlan maybe???
Back to top
NC-Fordguy
Tue Jun 10 2008, 05:36PM
Webmaster

Registered Member #2
Joined: Tue Mar 06 2007, 05:53PM
Location: Bethel NC
Posts: 1151
mud4me wrote ...

NC-Fordguy wrote ...

Looks like I am out as I'm having to go another direction than planned.

Not enough time and $$$

I take it that the Detroit is toast?



Still not sure as that determination was shelved for a couple of weeks.

For peace of mind, I'm upgrading. Front now has alloy shafts installed

I'll get the rear done in the next couple of weeks. Gotta figure out how to set up gears and an arb

No Hablos Jeep

If it doesn't make sense, do it
Back to top
mud4me
Tue Jun 10 2008, 05:45PM

Registered Member #143
Joined: Thu Dec 06 2007, 10:04PM
Location: Raleigh, NC
Posts: 375
toyzilla wrote ...

I like to go to Harlin KY. Leave thurs afternoon, A nice 3-4 day weekend. I when last year and took about 8 hours from were i'm at in ahoskie,nc.




Serious? I've never been, almost ready and able to go.

NC-Fordguy wrote ...

Still not sure as that determination was shelved for a couple of weeks.

For peace of mind, I'm upgrading. Front now has alloy shafts installed

I'll get the rear done in the next couple of weeks. Gotta figure out how to set up gears and an arb


Sounds like you've got a plan.

Two Jeeps one Samurai
No $$$
Back to top
toyzilla
Sat Jun 14 2008, 12:42PM
Moderater

Registered Member #12
Joined: Mon Mar 12 2007, 10:39AM
Location: Tarboro, NC
Posts: 477
my rig just about done and raedy to wheel. Ed get yours ready and lets go wheeling.



"take it to the eXtreme"

93 Toyota Custom Built Tube Buggy Rock Crawler
4-link F&R, 36" TSL tires, 12k winch, Fox Shox, lock & loaded, dual cases, beadlocks , New Dirty 30 Front Axles
Check Out My Rig and Trail Rides. My photo's
scimpressions.com
Back to top
gogogadgetbiker
Sat Jun 14 2008, 02:17PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
I am going to Harlen July 4th weekend. Running up there with some Cherokee buddies of mine. Leaving Thur AM and coming back Sunday. Anybody want to go? No room on the trailer but your more than welcome to come on your own.

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
toyzilla
Wed Jun 18 2008, 06:26PM
Moderater

Registered Member #12
Joined: Mon Mar 12 2007, 10:39AM
Location: Tarboro, NC
Posts: 477
so who's all going? I'm still work like hell trying to get meine together, should be ready by then.

"take it to the eXtreme"

93 Toyota Custom Built Tube Buggy Rock Crawler
4-link F&R, 36" TSL tires, 12k winch, Fox Shox, lock & loaded, dual cases, beadlocks , New Dirty 30 Front Axles
Check Out My Rig and Trail Rides. My photo's
scimpressions.com
Back to top
gogogadgetbiker
Wed Jun 18 2008, 08:30PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
Just me and some Cherokee dudes going to Harlen. I will be the odd man out.

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
ord.sgt.26NC
Thu Jun 19 2008, 05:44AM
Registered Member #23
Joined: Sun Mar 18 2007, 10:12PM
Posts: 543
gogogadgetbiker wrote ...

Just me and some Cherokee dudes going to Harlen. I will be the odd man out.


Just don't be the pivot man in that circle Bill.
Back to top
SFAZR2Dave
Thu Jun 19 2008, 01:24PM

Registered Member #129
Joined: Fri Oct 26 2007, 06:17PM
Location: Davie County
Posts: 10
I have room for one on my trailer if anybody wants to split fuel to Harlan. PM me.


Dave

2.5 tons, 47's, Atlas, 4 linked, EXO.
Back to top
mud4me
Fri Jun 27 2008, 02:27PM

Registered Member #143
Joined: Thu Dec 06 2007, 10:04PM
Location: Raleigh, NC
Posts: 375
Well, I thought I'd have the Jeep ready to go by now but the rock gods must be against me going out on the fourth.
Maybe next time...

Two Jeeps one Samurai
No $$$
Back to top
XJ_Hunter07
Mon Jun 30 2008, 04:00PM

Registered Member #182
Joined: Tue Apr 15 2008, 06:43AM
Location: Greenville, NC
Posts: 42
Looks like I'm gonna have to miss out on this one too. I'm making slow progress on the Jeep, but should be ordering the lift sometime this week. Who's up for an install meet?? lol

92' XJ - Silver Bullet 2.0
Back to top
gogogadgetbiker
Mon Jun 30 2008, 06:59PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
Broke my arm so I ain't doing jack.

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
mud4me
Tue Jul 01 2008, 08:13AM

Registered Member #143
Joined: Thu Dec 06 2007, 10:04PM
Location: Raleigh, NC
Posts: 375
gogogadgetbiker wrote ...

Broke my arm so I ain't doing jack.

Ouch!
Sorry to hear that.

Two Jeeps one Samurai
No $$$
Back to top
biggy
Wed Jul 02 2008, 06:52AM

Registered Member #11
Joined: Mon Mar 12 2007, 06:55AM
Posts: 383
how'd you do that Bill?

it's a '51...it's just been modified some
Back to top
gogogadgetbiker
Mon Jul 07 2008, 11:06AM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
Went to Harlen, it rocked tell you guys about it later.

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
mud4me
Mon Jul 07 2008, 11:16AM

Registered Member #143
Joined: Thu Dec 06 2007, 10:04PM
Location: Raleigh, NC
Posts: 375
gogogadgetbiker wrote ...

Broke my arm so I ain't doing jack.



gogogadgetbiker wrote ...

Went to Harlen, it rocked tell you guys about it later.





Two Jeeps one Samurai
No $$$
Back to top
toyzilla
Tue Jul 08 2008, 05:24PM
Moderater

Registered Member #12
Joined: Mon Mar 12 2007, 10:39AM
Location: Tarboro, NC
Posts: 477
when you going back?????

"take it to the eXtreme"

93 Toyota Custom Built Tube Buggy Rock Crawler
4-link F&R, 36" TSL tires, 12k winch, Fox Shox, lock & loaded, dual cases, beadlocks , New Dirty 30 Front Axles
Check Out My Rig and Trail Rides. My photo's
scimpressions.com
Back to top
gogogadgetbiker
Wed Jul 09 2008, 03:59PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
Going back Oct 2-7

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
Go to page   <<       

Jump:     Back to top

Syndicate this thread: rss 0.92 Syndicate this thread: rss 2.0 Syndicate this thread: RDF
Powered by e107 Forum System