Forums
NCKrawlers :: Forums :: NCK Tech Forums :: Pimp my 4x4
 
<< Previous thread | Next thread >>
ZR2 Truggy Build
Go to page   <<        >>  
Moderators: Administrator, NC-Fordguy, KrawlinYJ
Author Post
gogogadgetbiker
Sun Feb 17 2008, 03:19PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
An LED goes in the center hole of the rear gusset.
[ image disabled ]
Starting on the 4-link
[ image disabled ]
Pretty cool winch mount, the plate is just for mockup. It is open in the center so my rear winch can pull double duty as extraction/suck down winch without any pulleys.
[ image disabled ]
Fuel cell tabs, the cell will also be supported by the two tubes running front to back.
[ image disabled ]
Rear wheelbase set
[ image disabled ]

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
gogogadgetbiker
Sun Feb 17 2008, 03:19PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
Had to take a vid of my door latch in action.
http://s74.photobucket.com/albums/i266/gogogadgetbiker/Truggy/?action=view&current=Truggy114.flv

[ Edited Sun Feb 17 2008, 03:22PM ]

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
pee-J
Mon Feb 18 2008, 12:11AM

Registered Member #24
Joined: Tue Mar 20 2007, 06:44PM
Location: Oklahoma City, OK
Posts: 377
nice work...

95 XJ 4.0HO>AW-4>NP241"Roc-Trac." Rough Country 6.5" on 33's. Warn M8000, locked and armored up but (was) driven daily.
Back to top
NC-Fordguy
Mon Feb 18 2008, 10:21PM
Webmaster

Registered Member #2
Joined: Tue Mar 06 2007, 05:53PM
Location: Bethel NC
Posts: 1151
Freakin awesome

No Hablos Jeep

If it doesn't make sense, do it
Back to top
jmeloxj
Tue Feb 19 2008, 10:52AM
Registered Member #16
Joined: Mon Mar 12 2007, 07:49PM
Posts: 24
looks really good man


2000xj with 6.5 lift 33x12.50MT mtz's ready for the build but the pockets ai n't
Back to top
rockcity
Wed Feb 20 2008, 12:45AM

Registered Member #21
Joined: Tue Mar 13 2007, 05:17PM
Location: Greenville, NC
Posts: 703
nice door latch. I've used those same T-handles for tons of stuff. Handy!

www.ECORS.com
Back to top
gogogadgetbiker
Mon Feb 25 2008, 09:27AM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
Pics as promised..

New tranny crossmember, all .25" thick including tubing. My old one had been smashed about 18 times.
[ image disabled ]
[ image disabled ]

Winch mount
[ image disabled ]

Tire mount
[ image disabled ]
[ image disabled ]
[ image disabled ]

Truss speed holes... Might get better MPG's now I think I am going to add one more on each side between the one's that are already there.
[ image disabled ]
[ image disabled ]

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
gogogadgetbiker
Mon Feb 25 2008, 09:30AM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
More...

New windshield tube
[ image disabled ]

Stuff installed
[ image disabled ]
[ image disabled ]

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
n3pht
Mon Feb 25 2008, 06:23PM
NCK Officer

Registered Member #8
Joined: Thu Mar 08 2007, 10:59PM
Location: G-vagas
Posts: 373
How many more bends after I left did you make on the windshield tube

87 Suzuki Samrai
STOCK


PAVED ROADS ANOTHER WASTE OF GOVERNMENT SPENDING
Back to top
SAYWHENCJ7
Mon Feb 25 2008, 07:05PM
NCK Member

Registered Member #97
Joined: Sun Aug 19 2007, 04:21PM
Location: GREENVILLE
Posts: 112
LOOKING GOOD.
Back to top
gogogadgetbiker
Mon Feb 25 2008, 10:41PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
n3pht wrote ...

How many more bends after I left did you make on the windshield tube


About 89

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
gogogadgetbiker
Mon Feb 25 2008, 10:47PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
Got the roof done tonight, just a little bit more welding to do. I have said it before and I'll say it again.................

I could not have even come close to having this much done without my buddy Ryan that man works like a maniac!

Anyway heres the pics.....
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]

It's getting very very close with the 4-link. It is going to be tight trying to keep the lower links from hitting the frame. I may have to raise it about 1" from where it is to make room.
[ image disabled ]

[ Edited Mon Feb 25 2008, 10:50PM ]

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
gogogadgetbiker
Tue Feb 26 2008, 10:52PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]
[ image disabled ]

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
Rockroaster
Sun Mar 09 2008, 08:04PM

Registered Member #29
Joined: Wed Apr 04 2007, 03:20PM
Location: Greenville, NC/ Wooster, Oh
Posts: 81
lookin good bro...

2001 TJ, Lowered so I can scrape curbs, 26" rims, hydro's, 4 15" subs, fart can, neons, and a girl in a bikini like you wouldn't believe. Hehe.
Back to top
biggy
Thu Mar 27 2008, 05:26PM

Registered Member #11
Joined: Mon Mar 12 2007, 06:55AM
Posts: 383
well???

it's a '51...it's just been modified some
Back to top
gogogadgetbiker
Fri Mar 28 2008, 11:48AM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
I have been busy with other things for the last month, I'll get back on it this Sunday.

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
Hadfield4wd
Thu Apr 03 2008, 06:33PM

Registered Member #43
Joined: Sun Apr 15 2007, 02:36PM
Posts: 134
Bill that looks freaking awesome. Did you figre out your fuel pump mounting. I just did an external on my xj, I know it will not last as long as an internal, but how many road miles do we see anyway. And I carry a spare.

Matt

Back to top
gogogadgetbiker
Thu Apr 10 2008, 11:00PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
Got a bunch done on the front tonight, the main frame rails are in and welded.


[ image disabled ]

[ image disabled ]

[ image disabled ]

[ image disabled ]

[ image disabled ]

[ image disabled ]

[ image disabled ]

[ image disabled ]

[ image disabled ]

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
jeepnchris
Mon Apr 28 2008, 09:37AM
Registered Member #62
Joined: Fri May 04 2007, 03:03PM
Posts: 11
Nice work!

Chris
Back to top
gogogadgetbiker
Mon Apr 28 2008, 09:29PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
I don't know if you remember Chris, but this is the truck I leaned into the tree at your place. Sure has changed a bunch.

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
gogogadgetbiker
Sun May 04 2008, 09:26PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
Got a bit more done this weekend.
[ image disabled ]
[ image disabled ]
[ image disabled ]
New flat skid under the belly.
[ image disabled ]

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
mud4me
Wed May 07 2008, 12:16PM

Registered Member #143
Joined: Thu Dec 06 2007, 10:04PM
Location: Raleigh, NC
Posts: 375
Bill,
It's looking sweet.
Hope you can get it on the trail soon for a test run.

Two Jeeps one Samurai
No $$$
Back to top
gogogadgetbiker
Thu May 08 2008, 09:34PM

Registered Member #33
Joined: Fri Apr 06 2007, 11:24AM
Location: G-Vegas
Posts: 388
You and me both brother. I am tired of this "no wheeling" crap.

2002 GMC Sonoma ZR2 SFA
HP D60 front, 5:13's,Chevy brakes, ARB, 35 spline hubs, rotated
GM 14B FF rear 5:13's, Disk, Detroit, 3/8" diff cover
Alcan Waggie 4" front springs and ZR2 4" rear springs
Highsteer/crossover steering, PSC Box
42" IROKs, Eaton 32 Bolt Beadlocks
High Angle Driveshafts
Custom T-case
Back to top
NC-Fordguy
Thu May 08 2008, 09:49PM
Webmaster

Registered Member #2
Joined: Tue Mar 06 2007, 05:53PM
Location: Bethel NC
Posts: 1151
The new avatar is sharpe!!!

No Hablos Jeep

If it doesn't make sense, do it
Back to top
jeepnchris
Fri May 09 2008, 11:11AM
Registered Member #62
Joined: Fri May 04 2007, 03:03PM
Posts: 11
gogogadgetbiker wrote ...

I don't know if you remember Chris, but this is the truck I leaned into the tree at your place. Sure has changed a bunch.



I remember! You went all day without any damage - then hit a tree on an access road. LOL

Chris
Back to top
Go to page   <<        >>   

Jump:     Back to top

Syndicate this thread: rss 0.92 Syndicate this thread: rss 2.0 Syndicate this thread: RDF
Powered by e107 Forum System